Siemens Gigaset S2 HiPath 4000 Operating Manual page 61

Step by Step
FWD-VAR-ALL-EXT
> <
NEXT
> <
BASIC SERVICE
> <
DESTINATIONS
FORWARD
NEXT
NEXT
> <
ENTER DESTIN.:
SAVE
Output on first line.
[
Confirm to select the next variable forwarding type.
or
> <
To edit the current variable forwarding type, select the
required command.
Programming a forwarding destination
F
Open the System Menu.
[
Select and confirm the basic service.
[
Select the menu item and confirm.
[
Confirm. The display shows "variable forwarding".
[
Confirm. The display shows "FWD-FIXED off".
[
Confirm. The display shows "Forwarding for internal".
[
Select and confirm.
o
Enter the phone number for the forwarding destination.
Any destination previously programmed will be over-
written.
[
Confirm when the complete number has been entered.
To select a different forwarding type, proceed as
described on
If variable forwarding was previously programmed and
activated, it is deactivated and the forwarding destina-
tion is deleted (for exception, see
warding is deactivated.
Deleting a forwarding destination
A variable forwarding destination is automatically
deleted when the forwarding type is deactivated.
Activating variable forwarding
Variable forwarding is automatically activated when the
forwarding destination is programmed.
Conducting calls – enhanced functions
page 52.
page 52). Fixed for-
53