Table of Contents
Advertisement
Appendix
The handset is switched to data transfer mode by:
•
•
•
•
•
•
•
Cleaning the handset
Removing everyday dirt
To clean the handset and the charging shell, simply wipe them with a damp
or anti-static cloth. Never use a dry cloth.
Do not use abrasive cleaning agents.
After contact with liquids
1. Deactivate the handset immediately. Do NOT activate it!
2. Remove the batteries immediately. Leave the battery compartment
3. Allow the liquid to drain off:
The handset can be put back into operation once it is completely dry.
Storage/Safekeeping
When storing your handset, take care to protect its soft parts from damage
by sharp objects. A protective case can help.
To order the protective case:
Mr. Sigmund Söllner
Tel.:+49 (89) 9221 6626
Fax: +49 (89) 9221 6599
E-mail: sigmund.soellner@siemens.com
93
activating read/write access to the phonebook
activating read/write access to the e-mail directory
activating read/write access to the call-by-call list
activating read/write access to the appointments list
activating read/write access to the redial list
loading screensavers
loading melodies
The handset automatically switches to idle if a fault occurs in the
course of transferring data.
open.
– Hold the handset in a horizontal position with the open battery com-
partment facing down.
– Hold the handset in a vertical position with the open battery compart-
ment facing down. Shake the handset gently, slightly tilting it back
and forth.
– Dab all components dry and then leave the handset in a warm spot
(other than a microwave, oven, etc...) for at least 72 hours with open
battery compartment and keypad facing down.
Advertisement
Table of Contents
