Sharp AL-1216 Operation Manual page 62

Using the SCANNER key to begin scanning
• Scanning is not possible during a copy job.
• If the unit is used to begin a scan job during a print job using the parallel
• When scanning an original that has been placed in the SPF, only one
1
Press the SCANNER (
The unit enters scan mode.
2
Place the original you wish to scan on the original table/SPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT"
(p.20).
3
Press the right copy quantity key to
display the number of the application that
you wish to use for scanning.
The application numbers are initially as follows.
SC1
SC2
SC3
SC4
SC5
SC6
60
interface connection or the USB interface connection, the scan job will be
stored and scanning will begin when the print job is completed.
original can be placed unless you are using Sharpdesk.
Application
number
) key.
Application launched
Sharpdesk (if installed)
E-mail (your standard e-mail program in the
Windows OS you are using)
Fax (if a fax program is installed)
OCR (if an OCR program is installed)
Microsoft Word (if installed)
Any application set in Button Manager