Sharp AL-1216 Operation Manual page 20

3
Press the tray select (
The single bypass (AL-1216)
If you insert a sheet of paper into the single bypass when multiple copies
have been set with the copy quantity setting (p.22), the copy quantity
setting will change to "0" and only one copy will be made.
1
Select copy settings before you begin the copy job.
For information on the copy settings, see "MAKING COPIES" (p.19)".
2
Set the paper guides to the paper width. Insert a single sheet of
copy (print face down) into the feed slot of the single bypass.
When you insert the paper,
the machine will
automatically draw in the
paper and begin copying.
Note for loading envelopes
• Envelopes must be fed narrow side into the feed.
• Do not use non-standard envelopes, and envelopes that have metal clasps, plastic
snappers, string closures, windows, linings, self-adhesive, patches or synthetic
materials. Do not use envelopes that are filled with air or envelopes that have labels
or stamps attached.
• Envelopes of which the surface is not flat because of embossing may cause the
copies/prints to become smudged.
• Under high humidity and temperature conditions the glue flaps on some envelopes
may become sticky and be sealed closed when copied/printed.
• Use only envelopes which are flat and crisply folded. Curled or poorly formed
envelopes may be poorly copied/printed or may cause misfeeds.
• It is recommended that you perform a test copy before performing the actual copy/
printed job.
• Be sure to select either Com 10, DL, C5 or Monarch on the paper size setting of the
printer driver. (For detailed information on printer driver, refer to the online manual.)
18
• Paper must be fed narrow side into the feed slot.
• Transparency film, labels, and other special purpose papers
must be fed individually.
• When copying onto transparency film, remove each copy
promptly. Do not let copies stack up. When loading an
envelopes, make sure that it is straight and flat.
) key to select the multi-bypass tray.
Print face