Acura 2008 MDX Owner's Manual page 431

Main Menu
WHEEL NUT WRENCH
The wheel nut wrench supplied with
your vehicle is specially adapted to f it
the hoist shaf t. Do not use any other
tool.
8. Put the wheel nut wrench on the
hoist shaft. Turn the wrench
counterclockwise to lower the
spare tire to the ground.
Table Of Contents
BRACKET
9. Keep turning the wheel nut
wrench to create slack in the cable.
10. Remove the bracket from the
spare tire.
2008 MDX
Changing a Flat Tire
WHEEL NUT WRENCH
11. Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
CONTINUED
427