Compass - Acura 2008 MDX Owner's Manual

Main Menu
Canadian MDX model
Compass Operation
Compass operation can be affected
by driving near power lines or
stations, across bridges, through
tunnels, over railroad crossings, past
large vehicles, or driving near large
objects that can cause a magnetic
disturbance. It can also be affected
by accessories such as antennas and
roof racks that are mounted by
magnets.
Compass Calibration
If you see '' '' in the compass
display and ''CAL'' and ''
shown in the calendar display, the
compass is self-calibrating.
The compass may need to be
manually calibrated after exposure to
a strong magnetic field. If the
compass seems to be continually
showing the wrong direction and is
not self-calibrating, do the following.
Table Of Contents
COMPASS DISPLAY
1. Press and hold the SET button for
five seconds until the Clock
'' are display changes to ''ZON ? N.''
(Clock adjustment mode will be
started after the first two seconds.)
2. Press the SET button. ''CAL ? N''
will be displayed. At this point,
pressing SET button will exit
calibration mode.
2008 MDX

Compass

3. Press the button. ''CAL ? Y'' will
be displayed.
4. Press the SET button. The
compass display will change to
'' '' and ''CAL'' and ''
shown.
5. Drive the vehicle slowly in two
complete circles.
Press and
hold SET
Press SET
Press
'' are
CONTINUED
273