Vehicle Stability Assist (Vsa) System - Acura 2008 MDX Owner's Manual

Honda 2008 mdx
Hide thumbs Also See for 2008 MDX:
Table of Contents

Advertisement

Main Menu
The vehicle stability assist (VSA)
system helps to stabilize the vehicle
during cornering if the vehicle turns
more or less than desired. It also
assists you in maintaining traction
while accelerating on loose or
slippery road surfaces. It does this
by regulating the engine's output and
by selectively applying the brakes.
When VSA activates, you may notice
that the engine does not respond to
the accelerator in the same way it
does at other times. There may also
be some noise from the VSA
hydraulic system. You will also see
the VSA activation indicator blink.
The VSA system cannot enhance the
vehicle's driving stability in all
situations and does not control your
vehicle's entire braking system. It is
still your responsibility to drive and
corner at reasonable speeds and to
leave a sufficient margin of safety.
Table Of Contents
VSA Activation Indicator
When VSA activates, you will see the
VSA activation indicator blink.
Vehicle Stability Assist
(VSA) System Indicator
If this indicator comes on while
driving, pull to the side of the road
when it is safe, and turn off the
engine. Reset the system by
restarting the engine. If the VSA
system indicator stays on or comes
back on while driving, have the VSA
system inspected by your dealer.
If the indicator does not come on
when the ignition switch is turned to
the ON (II) position, there may be a
problem with the VSA system. Have
your dealer inspect your vehicle as
soon as possible.

Vehicle Stability Assist (VSA) System

2008 MDX
You will also see a ''CHECK VSA
SYSTEM'' message on the multi-
information display if there is a
problem with the VSA system.
If the low tire pressure/TPMS
indicator comes on, or the multi-
information display shows a
''CHECK TPMS SYSTEM'' message,
the VSA system automatically turns
on even when the VSA system is
turned off by pressing the VSA OFF
switch (see page
360
). If this
happens, you cannot turn the VSA
system off by pressing the VSA OFF
switch again.
Without VSA, your vehicle will have
normal braking and cornering ability,
but it will not have VSA traction and
stability enhancement.
359

Advertisement

Table of Contents
loading

Table of Contents