Changing A Flat Tire - Acura 2008 MDX Owner's Manual

Honda 2008 mdx
Hide thumbs Also See for 2008 MDX:
Table of Contents

Advertisement

Main Menu
If you have a flat tire while driving,
stop in a safe place to change it.
Drive slowly along the shoulder until
you get to an exit or an area to stop
that is far away from the traffic lanes.
The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.
Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.
1.
Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park. Apply the
parking brake.
Table Of Contents
CARGO AREA
FLOOR
TOOLS
2.
Turn on the hazard warning lights,
and turn the ignition switch to the
LOCK (0) position. Have all
passengers get out of the vehicle
while you change the tire.
3.
Open the tailgate.
SPARE TIRE
2008 MDX

Changing a Flat Tire

JACK
4.
Push the rear edge of the handle
to raise the handle loop and pull up
the loop to raise the cargo area
floor.
CONTINUED
425

Advertisement

Table of Contents
loading

Table of Contents