Acura 2008 MDX Owner's Manual page 143

Main Menu
Keyless Memory Settings
When you unlock the driver's door
with your remote, each remote
activates the keyless memory
settings related to that remote. The
driver's ID (MEMORY 1 or
MEMORY 2) is shown on the back
of each remote.
Table Of Contents
Here are the settings activated with
TM
the remote;
Customized settings
(see page
Driving position memory
(see page
Audio system settings
(see page
Climate control settings
(see page
When you unlock and open the
driver's door with the remote
transmitter, the driver's seat (except
the power lumbar feature) and
outside mirrors start to move to the
positions stored in memory. The
indicator in the related memory
button to the remote comes on.
83 ).
157 ).
200 ).
171 ).
2008 MDX
Remote Transmitter
The steering wheel will move to the
stored position when you insert the
key into the ignition switch.
You will also see the ''WELCOME
DRIVER 1'' or ''WELCOME
DRIVER 2'' message on the multi-
information display, depending on
which linked remote transmitter is
used.
To turn off this feature, press and
hold the LOCK and UNLOCK
buttons at the same time. The LED
in the remote will blink twice. Then
release the buttons. Doing this
cancels the keyless memory settings
for that remote and restores the
default settings.
To turn the keyless memory settings
back on, repeat this procedure. The
LED will blink once to indicate the
feature has been turned on.
139