Acura 2008 MDX Owner's Manual page 289

Main Menu
Setting Up the System
The voice of the HFL can be set to
male or female (U.S. models only).
Also, the incoming notification can
be set to a ring tone, a prompt, or no
notification.
To set up the system, do this:
Press and release the Talk button.
1.
After the beep, say ''System.'' The
HFL response is, ''System options
are setup and clear.''
2. Press and release the Talk button.
After the beep, say ''Setup.'' The
HFL response is ''Would you like
male or female prompts?''
Table Of Contents
3. Press and release the Talk button.
After the beep, say ''Male'' or
''Female,'' depending on the
system voice you want. The HFL
response is, ''Male (Female)
prompts have been selected.
Would you like an audible
notification of an incoming call?''
4. Press and release the Talk button.
If you say ''Yes'' after the beep, the
HFL response is, ''Would you like
the notification to be a ring tone or
prompt?'' If you say ''No'' after the
beep, the HFL returns to its main
menu. Saying ''No'' will result in no
ring tone or prompt playback
during an incoming call. The audio
system will still mute, and a
message will be displayed.
2008 MDX
Bluetooth HandsFreeLink
5. Press and release the Talk button.
After the beep, say ''Ring tone'' or
''Prompt.'' The HFL response is ''A
ring tone will be used'' or ''An
incoming call prompt will be used.''
If you choose ''Ring tone,'' you will
hear a ring tone through the audio
speakers to announce an incoming
call. If you choose ''Prompt,'' you
will hear this message to
announce an incoming call: ''You
have an incoming call.''
6. The HFL response continues ''A
security option is available to lock
the HFL system. Each time the
vehicle is turned on, a passcode
would be required to use this
system. Would you like this
security option turned on?'' If you
say ''Yes,'' you can set your
passcode. Refer to the setting
procedure in the next column.
285