OPERATION
3.
Plug in the appliance following the instruction provided with the
parallel operation cable kit.
4.
Turn on the appliance.
If the generators are overloaded (see page
circuit in a connected appliance, the overload indicator (red) will go
ON. The overload indicator (red) will stay ON, and after about four
seconds, current to the connected appliance(s) will shut off, and the
output indicator (green) will go OFF. Stop the engines and investigate
the problem.
Determine if the cause is a short circuit in a connected appliance, an
overload, or an overheated inverter. Correct the problem and restart
the generator.
30
32
), or if there is a short