Ac Operation - Honda EG3500X Owner's Manual

AC Operation
/
1. Start the engine (refer to page 23).
~
2. Turn the voltage selector switch to either position.
With the voltage selector switch in the "12OR~OV"position, you can use the
120V and 120/24OV receptacles simultaneously. If you are NOT using the
120/24OV receptacle, but require more porker from the 12OV twist lock
receptacle, then select the "12OV ONLY" pos~ition.
3.Switch ON the AC circuit
VOLTAGE SELECTOR
AC CIRCUIT
breaker.
4. Plug in the appliance.
Most motorized appliances require
more than their rated wattage for
startup.
Do not exceed the current limit specified for any one receptacle. If an
overloaded circuit causes the AC circuit breaker or circuit protector to switch
OFF, reduce the electrical load on the circuit, wait a few minutes and then
reset the circuit breaker.
16