Installing The Adapter In A Server - HP NC7770 User Manual

Installing the Adapter

Installing the Adapter in a Server

Refer to the HP ProLiant server documentation for additional information on how to safely
install a PCI card in your server.
Figure 2-1: Installing the adapter in a server
1. Remove the server cover and cover bracket from a PCI slot.
2. Firmly seat the adapter in the PCI slot and secure the adapter bracket.
3. Replace the server cover and plug in the power cord.
2-2
WARNING: If the server is not PCI Hot Plug compliant, power it down and unplug the
power cord from the power outlet before removing the server cover. Failure to do so
may damage the adapter or server.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal
system components to cool before touching them.
HP NC7770 PCI-X Gigabit Server Adapter User Guide