Parallel-One Speaker (Dual 4 Ohm Voice Coils) - Orion HCCA102 Owner's Manual

Parallel—One Speaker (dual 4 ohm voice coils)
One dual 4 ohm voice coil woofer with voice coils in parallel results in a 2 ohm load
to the amplifier.
Figure 4
Figura 4
Abbildung 4
1. Connect the speaker in parallel by connecting the two positive (+) terminals
together and the two negative (-) terminals together.
2. Wire both positive (+) terminals of the woofer to the positive (+) terminal on the
amplifier. Wire both negative (-) terminals of the woofer to the negative (-) terminal
on the amplifier.
8
- -
+ +
© 2012 MD Audio Engineering. All rights reserved.
+
-