Advertisement
HP 11852B 50-ohm to 75-ohm minimum loss pad
(continued)
Connectors
Dimensions
Weight
50-ohm accessory kits
The HP 11853A 50-ohm type-N and the HP 11854A
50-ohm BNC accessory kits provide the RF compo-
nents generally required when using either the
HP 85046A, 85047A or 11850C with the HP 8753ES
Option 011 when measuring devices having 50-ohm
type-N or BNC connectors. These kits are supplied
with a storage case.
HP 11853A 50-ohm type-N accessory kit
Includes
Type-N (f) short
Type-N (m) short
Type-N (m) to N (m) adapter
Type-N (f) to N (f) adapter
HP 11854A 50-ohm BNC accessory kit
Includes
Type-N (m) to BNC female adapter
Type-N (m) to BNC male adapter
Type-N (f) to BNC male adapter
Type-N (f) to BNC female adapter
BNC (m) short
75-ohm accessory kits
The HP 11855A 75-ohm type-N and the HP 11856A
75-ohm BNC accessory kits provide the RF compo-
nents generally required when using either the
HP 85046B or the HP 11850D power splitter with the
HP 8753ES Option 011 when measuring devices having
75-ohm type-N or BNC connectors. These kits are sup-
plied with a storage case.
HP 11855A 75-ohm type-N accessory kit
Includes
Type-N (f) short
Type-N (m) short
Type-N (m) to N (m) adapter
Type-N (f) to N (f) adapter
Type-N (m) termination
HP 11856A 75-ohm BNC accessory kit
Includes
Type-N (m) to BNC (f) adapter 1250-1535
Type-N (m) to BNC (m) adapter 1250-1533
Type-N (f) to BNC (m) adapter 1250-1534
Type-N (f) to BNC (f) adapter
BNC (m) short
BNC (m) termination
1. Return loss and insertion loss limited below 16 MHz by series capacitor.
2. Internal bias tees cannot be used with this limiter.
50-ohm type-N (f) to
75-ohm type-N (m)
standard Option 004,
50-ohm type-N (m) to
75-ohm type-N (f)
14-mm D x 70-mm L
(0.56 in x 2.75 in)
Net 0.1 kg (0.316 lb)
HP part number
HP 11511A
HP 11512A
1250-1475
1250-1472
HP part number
1250-1476
1250-1473
1250-1477
1250-1474
1250-0929
HP part number
1250-1531
1250-1530
1250-1528
1250-1529
1250-1532
HP part number
1250-1536
1250-0929
11652-60010
RF limiter
Externally attaches to one or both ports of the analyz-
er. Provides protection against potential high-power
transients from external devices.
Specifications
HP 11930A 7-mm RF limiter
Frequency range
Nominal insertion loss
DC to 3 GHz
3 GHz to 6 GHz
Return loss
DC to 3 GHz
3 GHz to 6 GHz
Maximum input power
Maximum DC
HP 11930B 50-ohm type-N RF limiter
Frequency range
Nominal insertion loss
5 MHz to 3 GHz
3 GHz to 6 GHz
Return loss
5 MHz to 3 GHz
3 GHz to 6 GHz
Maximum input power
HP 85024A high-frequency probe
Two probes may be powered directly from the front panel
of the HP 8753ET/ES. Refer to technical specifications,
HP literature #5954-8393, for more information.
Specifications
Input capacitance (at 500 MHz)
Input resistance
Bandwidth
Gain (at 500 MHz)
Frequency response
300 kHz to 1 GHz
1 GHz to 3 GHz
Input voltage for < 1 dB compression
Supplement characteristics
Noise figure
<100 MHz
100 MHz to 3 GHz
Includes
Type-N (m) adapter
10:1 divider
Spare 12 mil probes
2.5-inch ground lead
Hook tip
Spanner tip
Probe tip nut driver
DC to 6 GHz
1.0 dB
1.5 dB
22 dB
20 dB
3W
30 V, 350 mA
2
5 MHz to 6 GHz
1.0 dB
1
1.5 dB
1
21 dB
17 dB
3W
<0.7 pF (nominal)
1 Megohm (nominal)
300 kHz to 3 GHz
0 dB ±1 dB
±1 dB
+2, -3 dB
0.3 V
< 50 dB
< 25 dB
HP part/model number
HP 11880A
HP 11881A
85024-20012
01223-61302
HP 10229
5060-0549
8710-1806
27
Advertisement
