Care Of Your Steam Mop - Shark S3601CO Owner's Manual

Care of Your Steam Mop

fig. 14
fig. 15
AFTER USE AND STORAGE
1 W hen you have finished using the
steam mop, press the ON/STANDBY
switch until the LED light turns
flashing BLUE. This stops the unit
from steaming. Unplug the cord from
the outlet and place the mop into the
upright position. Let the unit cool for
2-3 minutes.
R emove the micro-fiber cleaning pad
by releasing the quick fasteners and
using the lavender loop on the side
of the pocket, avoiding contact with
the hot pad or dirt. (fig. 14)
10 TOLL FREE: 1-800-798-7398
S3601CO_IB_110117.indd 10-11
fig. 16
2 E mpty the water tank before
storage. Remove the water tank cap
and empty the tank over a sink.
Replace the water cap. (fig. 15)
3 To store the Shark Pro Steam
®
Pocket Mop hanging up, first
®
remove the head (after it has cooled
and the steam has been released)
then hang on a large hook. (fig. 16)
fig. 17
CARE OF YOUR MICRO-FIBER
CLEANING PAD
1 We recommend washing your
micro-fiber cleaning pad separately
from other fabrics to avoid picking
up lint. Only use liquid detergent
(no powder detergent). Don't use
any fabric softeners or bleach. Line
dry or dry on a low dryer setting.
(fig. 17)
2 If there are loose threads on the
micro-fiber cleaning pad carefully
cut the thread with scissors. Don't
pull on them or cut at the base.
(fig. 18)
English
To order additional parts and
accessories, feel free to contact
us at www.SharkClean.com or
call 1-800-798-7398.
fig. 18
DECALCIFYING YOUR STEAM MOP
Calcium and mineral deposits can
build up and impact the performance
of your steam mop over time.
To extend the life of your product
we recommend that you use
distilled water or Shark®'s
Water Filtration Bottle.
Visit www.SharkClean.com to order.
www.sharkclean.com 11
1/17/11 4:28 PM