Using Your Carpet Glider - Shark S3601CO Owner's Manual

Using Your Steam Mop - cont'd
fig. 11
5 When one side of the micro-fiber
cleaning pad gets dirty, just flip the
mop head and you can quickly start
using the other side. (fig. 11)
6 When the water tank is empty, the
steam mop will stop producing
steam. You can refill the water tank
at any time as long as the mop is
unplugged from the outlet. Follow
the instructions from page 4. This
applies to switching the mop heads
or micro-fiber cleaning pad as well.
8 TOLL FREE: 1-800-798-7398
S3601CO_IB_110117.indd 8-9
NOTE: Please wait 2-3 minutes for
the Steam Mop to cool off before
removing the mop head or the
micro-fiber cleaning pad. Never leave
the steam mop with a damp/wet
micro-fiber cleaning pad on
any floor.

Using Your Carpet Glider

fig. 12
THE CARPET GLIDER
1 The Carpet Glider can be used with
the all-purpose head to lightly steam
your carpet and area rugs. Just
place the mop head with micro-fiber
cleaning pad attached on top of the
glider. The recommended steam
setting is SCRUB when using the
carpet glider. (fig. 12)
English
The Steam Mop is great for
grooming and freshening
though it won't clean your
carpet or area rugs.
fig. 13
2
Move the steam mop back and
forth across a section of the carpet.
The steam mop won't clean your
carpeting or areas rugs, but it's great
for grooming and freshening.
(fig. 13)
www.sharkclean.com 9
1/17/11 4:28 PM