Care And Maintenance; Steam Pocket - Shark SM200 Owner's Manual

Care and Maintenance

AFTER USE AND STORAGE
1 When you have finished using the Sonic

Steam Pocket

Mop, unplug the cord from
™
the outlet and let the unit cool 2-3 minutes.
Release the residual steam by pumping the
handle several times before removing the Sonic
Lift cleaning pad from the mop head.
™
fig. 13
2 Remove the Sonic Lift
releasing the hook and loop fasteners and
using the lavender loop on the side of the
pocket to pull off. Avoid contact with the hot
pad or dirt. Then empty the water tank.
(Fig. 13)
3 To store the Shark
Mop hanging up; first remove the head (after
it has cooled and the steam has been released)
then hang on a large hook. (Fig. 14)
NOTE: If you want to store it standing upright,
then make sure it's leaning against a wall for
added support and safety. Always store your
Sonic Steam Pocket
Lift cleaning pad removed and away from
™
children or high traffic areas.
SM200_11_IB_ENG_120608_1.indd 7
fig. 14
cleaning pad by
™
Sonic Steam Pocket
®
Mop with the Sonic
™
fig. 15
CARE OF YOUR CLEANING PAD
1 We recommend washing your Sonic Lift
cleaning pads separately from other fabrics
to avoid picking up lint. Only use liquid
detergent (no powder detergent). Do not
use any fabric softeners or bleach. Line dry
or dry on a low dryer setting. (Fig. 15)
2 If there are loose threads on the cleaning pad
carefully cut the thread with scissors. Do not pull
on them or cut at the base. (Fig. 16)
IMPORTANT: The cleaning pad may be very
™
hot from the steam. Use caution when removing.
Let the unit cool for 2-3 minutes before removing
the cleaning pad.
AVOIDING DECALCIFICATION IN YOUR
STEAM MOP
Calcium and mineral deposits can build up and
impact the performance of your steam mop
over time. To extend the life of your product we
recommend that you use distilled water.
fig. 16
™
www.sharkclean.com
12-06-08 4:12 PM
7