Care And Maintenance - Shark LIFT-AWAY PRO STEAM POCKET MOP S3901K N Owner's Manual

Care and Maintenance

fig. 26
AFTER USE AND STORAGE
1 When you have finished using the Handheld
Steamer, reattach it to the mop by first placing
the bottom of the Handheld Steamer into the
cradle of the mop housing. (fig. 26)
2 Then slide the top end of the Handheld Steamer
into the mop housing and snap into place.
NOTE: Make sure all attachments are removed
before reuniting the Handheld Steamer with the
Steam Mop.
3 If you have finished mopping, press the ON/
STEAM SETTING button until the LED light blinks
blue. This stops the unit from steaming. Unplug
the cord from the outlet and place the mop into
the upright position. Let the unit cool for 2-3
minutes.
Remove the cleaning pad by releasing the quick
fasteners and using the lavender loop on the
side of the pocket, avoiding contact with the hot
pad or dirt. (fig. 27)
S3901K_N_11_IB_E_120410_3.indd 15
fig. 27
fig. 28
4 Empty the water tank before
storage. Remove the water tank cap and empty
the tank over a sink. Replace the water cap.
(fig. 28)
5 To store the Shark
Pocket
head (after it has cooled and the steam has been
released) then hang on a large hook. (fig. 29)
fig. 29
Lift-Away
® ™
Mop hanging up, first remove the
®
www.sharkclean.com
Pro Steam
15
12-04-10 11:40 AM