Care And Maintenance - Shark SK410 Series Owner's Manual

Care and Maintenance

fig. 14
fig. 13
AFTER USE AND STORAGE
1 When you have finished using the Shark
Professional Steam & Spray
cord from the electrical outlet and remove the
Cleaning Pad from the unit.
2 Wrap the power cord around the cord holders
when not in use. (Fig. 13)
3 Store the Shark Professional Steam & Spray
®
Mop in the upright position without the Cleaning
Pad on the unit and away from children or in
high traffic areas.
CLEANING THE SPRAY NOZZLE
1
If the spray nozzle becomes clogged, you can
clean it by removing it from the mop head. To
remove it, place a flat screwdriver underneath the
nozzle and lift up. The nozzle will pop off. Run the
spray nozzle under warm water to clean it out.
Reinsert the spray nozzle by lining up its grooves
with the inside of the nozzle hole. Push it in until
it snaps into place. (Fig. 14)
DECALCIFYING YOUR STEAM MOP
Calcium and mineral deposits can build up and
impact the performance of your steam mop
over time. To extend the life of your product we
recommend that you use distilled water.
®
Mop, unplug the
™
™
fig. 15
HOW TO REMOVE THE HANDLE
(Not for storage purposes)
1 Locate the release button behind the cord wrap
in the body of the mop.
2 Use a screwdriver to press the release button.
(Fig. 15)
3 Pull up on handle to remove from body of the
mop.
www.sharkninjamanuals.com 7