Pride Mobility Jazzy Elite Series Owner's Manual page 14

V . C O M F O R T A D J U S T M E N T S
Seat Position
You can move the seat forward or rearward by changing the extru-
sion mounting position.
To change the position:
1. Turn off the power to the controller.
2. Make sure the power chair is in drive mode.
3. Unplug the controller connector(s) from the power base.
4. Remove the seat from the power base.
5. Remove both extrusions from the bottom of the seat.
6. Reposition the extrusions on a different set of mounting holes.
You must move both extrusions the same number of holes either
forward or backwards. See figure 9.
WARNING! Changing the position of the seat can
cause instability. Do not change your seating
configuration
Mobility Products or your authorized Pride Provider.
WARNING!
programming or center of gravity of the power chair
to meet the individual needs of the client can result
in personal injury and/or equipment damage.
7. Fasten the extrusions back onto the bottom of the seat.
8. Reinstall the seat.
9. Reconnect the controller to the power base.
270-400 lbs.
Seat Depth
(122-181 kg)
18 in. deep
20 in. deep Allowed
22 in. deep Allowed
24 in. deep Allowed
NOTE: Pride Mobility Products offers a wide variety of seating
options available on power chairs in the Heavy Duty category,
which covers a wide range of user weights from 270-450 lbs. (122-
204 kg). RESNA testing to determine seat stability for the range of
seat depths across the user weight range in the Heavy Duty
category has been performed. Refer to the chart above for Pride's
recommendations for allowable seat depths by user weight range.
WARNING! Maximum weight capacity is reduced to
400 lbs. (181 kg) on 18-in. deep seat depth
configurations.
14
without first contacting
Failure to properly
Allowed
Pride
adjust the
401-450 lbs.
(182-204 kg)
Not Allowed
Allowed
Allowed
Allowed
www.pridemobility.com
SEAT MOUNTING HOLES
WARNING! The center of
gravity of your power chair
was factory
position that meets the
needs of the demographic
majority of
authorized Pride Provider
has evaluated your power
chair and
necessary adjustments to
suit your
requirements.
the seat
cause instability. Do not
change your
configuration without first
contacting Pride Mobility
Products
authorized Pride Provider.
Figure 9. Seat Position Adjustment
set to a
users. Your
made any
specific
Adjusting
position can
seating
or your
Jazzy Elite Series