Appendix B: Ping Ip Address - Planet ICA-3550V User Manual

The PING (stands for Packet Internet Groper) command is used to detect whether a specific IP address
is accessible by sending a packet to the specific address and waiting for a reply. It's also a very useful
tool to confirm whether or not Internet camera is installed or if the IP address conflicts with any other
device over the network.
If you want to make sure the IP address of Internet camera, utilize the PING command as follows:
Start a DOS window.
Type ping x.x.x.x, where x.x.x.x is the IP address of the Internet camera.
The replies, as illustrated below, will provide an explanation to the problem.
If you want to detect any other device that conflicts with the IP address of Internet camera, you also can
utilize the PING command but you must disconnect the Internet camera from the network first.
5 Mega-pixel Outdoor IR PoE IP Camera

Appendix B: PING IP Address

70
User's Manual of ICA-3550V