Planet ICA-3550V User Manual page 41

5 Mega-pixel Outdoor IR PoE IP Camera
User's Manual of ICA-3550V
who has the community name has the authority to read or edit the information of IP camera via SNMP.
Tick the box to enable SNMPv1 or SNMPv2c protocol, and specify the community name for write (read
and write) and read (read-only). The user who use read community name to access the IP camera
cannot modify any data of this camera.
SNMPv3:
For data security reason, the authentication and encryption assurances are added when
developing SNMPv3. The user has to give not only the security name (the same as "community name"
in v1&v2c, or sometimes we call it "context name") but the password in order to access the IP camera.
Please set security name, authentication type, authentication password, encryption type,
encryption password of write and read respectively. The password must be 8~64 bits in length.
Different from in SNMPv1 and v2c, the user have to create an account when using SNMPv3. In the
account parameters, key in the security name and password you set in the camera to get accessing.
SNMPv1/SNMPv2 Trap:
Trap is a mechanism that allows the managed device to send messages to manager instead of
waiting passively for polling from the manager. Specify the trap event. When those events happen,
the camera will send the ring message to the Trap Address, which is usually the manager's IP address.
Trap Community means the community that can receive the trap message.
• Cold Start: The camera starts up or reboots.
• Setting changed: The SNMP setting is changed.
41