Planar PT120 User Manual page 4

Lcd monitor
Hide thumbs Also See for PT120:
Table of Contents

Advertisement

Important Safety Instructions
Please read the following instructions carefully. This manual should be retained for future use.
1. To clean the LCD Monitor screen, first, make sure the Monitor is in the power off mode. Unplug
the Monitor from its power source before cleaning it. Do not spray liquid cleaners directly onto the
unit. Stand away from the LCD Monitor and spray cleaning solution onto a rag. Without applying
excessive pressure, clean the screen with the slightly dampened rag.
2. Do not place your LCD Monitor near a window. Exposing the Monitor to rain, water, moisture or
sunlight can severely damage it.
3. Do not place anything on top of the Monitor-to-PC signal cord. Make sure the cord is placed in an
area where it will not be stepped on.
4. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the
display.
5. Do not remove the cover or attempt to service this unit by yourself. You may void the warranty.
Servicing of any nature should be performed only by an authorized technician.
6. Safe storage of the LCD Monitor is in a range of minus 20 to plus 65 degrees Celsius (68°F-149°F).
Storing your LCD Monitor outside this range could result in permanent damage.
7. If any of the following occurs, immediately unplug your Monitor and call an authorized technician.
• The power or Monitor-to-PC signal cord is frayed or damaged.
• Liquid has been spilled onto the Monitor, or it has been exposed to rain.
• The Monitor has been dropped or the case has been damaged.
8. Only with use of supplied adaptor, in case of loss or replacement contact the retailer or service cen-
ter.
iii
Preface

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pl120

Table of Contents