Table of Contents
Advertisement
User's Manual
Note:
1. No Signal coming
When the monitor is ON and there is no Video signal re-
ceived, the following message will be displayed.
2. Signal out of monitor's supported range (Please refer to tht attached Addendum)
When the frequency range is out of the monitor's specifications, the display will show the following message on two cases:
Case 1:
The incoming resolution is lower than or equal to1024x768.
In this case, the screen display will not be centered and a
warning message appears.
Case 2:
The incoming resolution is higher than 1024x768.
In this case, the video data will be turned off and a warning
message appears at center.
10
Advertisement
Table of Contents
