8-Pin Atx 12V Power (Pwr2); Auxiliary Power For Graphics (Pwr3) - XFX nForce 680i User Manual

8-pin ATX 12V Power (
, the 8-pin ATX 12V power connection, is used to provide power to the
PWR2
CPU. Align the pins to the connector and press firmly until seated.
It is strongly recommended that you use an 8-pin ATX 12V
power supply; however, if you have a four-pin power supply,
plug the connector to pins 1, 2, 5, and 6 as shown.
Auxiliary Power for Graphics (
The connector is an auxiliary power connection for graphics cards.
PWR3
Exclusive power for the graphics card provides better graphics performance.
Hardware Installation
)
PWR2
5
12V
8
)
PWR3
+5V
GND
1
GND
4
Connect a four-pin
power plug to pins
1, 2, 5, and 6.
1
5
GND
+1.2
19