Xfx Nforce 680I Sli Motherboard - XFX nForce 680i User Manual

Installing and Configuring the XFX nForce 680i SLI Motherboard
XFX nForce 680i SLI
Motherboard
The XFX nForce 680i SLI motherboard with the C55 SPP and MCP processors
is a PCI Express, SLI-ready motherboard. Figure 1 shows the motherboard and
Figures 2 shows the back panel connectors.
10
2-Port SATA Power Cable (Qty Three)
1394 Cable
Provides two additional 1394 ports to either the
front or back panels of the chassis.
USB 2.0 4-Port Cable
Provides four additional USB ports to either the
front or back panels of the chassis.
SATA Signal Cable (Qty Six)
Used to support the Serial ATA protocol and each
one connects a single drive to the motherboard
IDE-ATA 133 HDD Cable
SLI Connector
Used to connect two graphic cards installed in the
x16 PCI Express slots in an SLI configuration.
Chipset Fan
This fan is recommended for use if overclocking or
using a liquid/passive cooling solution.