Table of Contents
Advertisement
Appendix B: Configuring the PCs
In this section, we'll introduce how to install and configure the TCP/IP correctly in
Windows 95/98. First make sure your Ethernet Adapter is working, refer to the adapter's
manual if needed.
1. Install TCP/IP component
1) On the Windows taskbar, click the Start button, point to Settings, and then click
Control Panel.
2) Double-click the Network icon, click on the Configuration tab in the appearing
Network window.
3) Click on the Add button. Select Protocol, and then click Add.
4) Under Manufacturers on Select Network Protocol page, highlight Microsoft.
Under Network Protocols, highlight TCP/IP. Click OK. TCP/IP protocol will take
effect after reboot.
2. Configure TCP/IP for your computer
TL-WR542G
Figure B-1: Add Network Protocol
Figure B-2: Select Network Protocol
- 60 -
54M Wireless Router User Guide
Advertisement
Table of Contents
