Wireless Settings - TP-Link TL-WR542G User Manual

54 mbps wireless router

Hide thumbs Also See for TL-WR542G:

Table of Contents

5.5.1 Wireless Settings

The basic settings for Wireless network are set on this page, figure 5-10:

SSID - Enter a value of up to 32 characters. The same name (SSID) must be

assigned to all wireless devices in your network. The default SSID is TP-LINK, but

it is recommended strongly that you change your networks name (SSID) to a

different value. This value is case-sensitive. For example, TP-LINK is NOT the

same as TP-Link.

Channel - This field determines which operating frequency will be used. It is not

necessary to change the wireless channel unless you notice interference problems

with another nearby access point.

Mode - Select the desired wireless mode. The options are:

•

54Mbps (802.11g) - Both 802.11g and 802.11b wireless stations can

connect to the Router.

•

11Mbps (802.11b)

Router.

Note: The default is "54Mbps (802.11g)", which allows both 802.11g and 802.11b

wireless stations to connect to the Router.

TL-WR542G

Figure 5-10: Wireless Settings

- Only 802.11b wireless stations can connect to the

- 25 -

54M Wireless Router User Guide

Table of Contents