Wireless Statistics; Dhcp - TP-Link TL-WR542G User Manual

access the Router, however, other wireless stations that are not in the list can
access the Router.
Note: If you enable the function and select the Deny the stations not specified by any
enabled entries in the list to access for Filtering Rules, and there are not any enable
entries in the list, thus, all wireless stations cannot access the Router.

5.5.3 Wireless Statistics

This page shows MAC Address, Current Status, Received Packets and Sent Packets
for each connected wireless station.
Figure 5-13: The Router attached wireless stations
•
MAC Address - The connected wireless station's MAC address
•
Current Status - The connected wireless station's running status, one of
STA-AUTH / STA-ASSOC / AP-UP / WPA / WPA-PSK / None
•
Received Packets - packets received by the station
•
Sent Packets - packets sent by the station
You cannot change any of the values on this page. To update this page and to show the
current connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next
button to go to the next page and click the Previous button to return the previous page.
Note: This page will be refreshed automatically every 5 seconds.

5.6 DHCP

TL-WR542G
- 30 -
54M Wireless Router User Guide