Hardware Installation Procedures（Figure2-1 - TP-Link TD-8840 User Manual

manufacturer's setup.
1~4(LAN): Connect with your computer's NIC.
LINE(WAN): Connect to the MODEM Port of Splitter or Connecting the telephone
line.
2.4 Hardware installation procedures（figure2-1）
The procedure to install the Router can be described in general terms in the
following steps:
First Step: Connecting the MODEM port of Splitter with the TD-8840 ADSL2+ ROUTER
LINE port by telephone line. While you need to use a telephone, please attach telephone
line into the phone of Splitter.
Second Step: Connect category 5 cable with RJ45 jacks to the ADSL2+ ROUTER's
LAN port and your computer's NIC.
Third Step: Plug one end of the AC Power Adapter into the Power jack on the Ethernet
ADSL2+ ROUTER and the other end to a standard electrical outlet.
Last Step: Check the line connection to see if everything is ready. Power up finally.
TD-8840 External ADSL2+ Router User Guide
（Figure2-1）
- 6 -