TP-Link TD-8840 User Manual page 13

TD-8840 External ADSL2+ Router User Guide
Enter VPI/VCI value and service category which is provided by your ISP, click next to
enter the next step. You will see the figure 3-7.
NOTE: The type of network protocol selected may be different in different area, there are
five types（Figure 3-7）, So you should ask your ISP to acquire the local type of network
protocol and Encapsulation mode.
Figure 3-7
After choosing the proper protocol, enter the correct parameters supported by your ISP.
Enable the configurations，then you will go to Internet.
PPP over ATM (PPPoA)
If you select the protocol of PPP over ATM (PPPoA), you will see the figure 3-8, enter the
value of user name and password which is provided by your ISP, after selecting the other
function(often using the default setup), click the next button.
- 11 -