Chapter 2 Hardware Installation; The Front Panel; Led Explanation - TP-Link TD-W8961ND User Manual

Chapter 2 Hardware Installation

2.1 The Front Panel

The LEDs locate on the front panel. They indicate the device's working status. For details, please
refer to LED Explanation.

LED Explanation:

Downloaded from www.Manualslib.com
TD-W8961ND
Name Status
On
(Power)
Off
On
Flash
(ADSL)
Off
On
Flash
(INTERNET)
Off
On
(WLAN)
Flash
Off
On
Flash
(WPS)
Off
manuals search engine
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 2-1
The modem router is powered on.
The modem router is off. Please ensure that the power adapter
is connected correctly.
ADSL line is synchronized and ready to use.
The ADSL negotiation is in progress.
ADSL synchronization fails. Please refer to
troubleshooting.
The network is available with a successful Internet connection.
There is data being transmitted or received via the Internet.
There is no successful Internet connection or the modem
router is operating in Bridge mode. Please refer to
troubleshooting.
Wireless is enabled but no data is being transmitted.
The modem router is sending or receiving data over the
wireless network.
Wireless function is disabled.
A wireless device has been successfully added to the network
by WPS function.
WPS handshaking is in process and will continue for about 2
minutes. Please press the WPS button on other wireless
devices that you want to add to the network while the LED is
flashing.
The WPS function is disabled or the wireless device fails to be
added to the network in 2 minutes after WPS function is
4
Indication
Note 1
Note 2
for
for