Morphy Richards TURBOSTEAM RN40630 MUK REV2 Instructions Manual
Morphy Richards TURBOSTEAM RN40630 MUK REV2 Instructions Manual

Morphy Richards TURBOSTEAM RN40630 MUK REV2 Instructions Manual

Turbosteam steam iron dual zone ceramic soleplate

Advertisement

Quick Links

RN40630 MUK Rev2_Instruction Book 15/09/2010 15:59 Page 1
Register online for your 2 year
guarantee. See back of this
instruction book for details.
(UK and Ireland customers only)
Upon registration with Morphy Richards
www.morphyrichards.co.uk
(UK & ROI only)
TurboSteam iron
Please read and keep these instructions
Getting the best from your new iron....
Safety first
Caution must be used when handling this appliance as it does get
very hot. Always switch off the unit and allow to cool before cleaning
or storing.
To improve the life of your new product and to ensure the cleanliness of your
clothes, we strongly recommend the use of distilled or demineralised water.
RN40630 MUK Rev2
If you have a problem or complaint, please call our dedicated UK based helpline
before returning your product to the retailer from where it was purchased.
UK Helpline: 0844 871 0960
Replacement Parts: 0844 873 0726
Ireland Helpline: 1800 409 119
steam/spray/shot

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TURBOSTEAM RN40630 MUK REV2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Morphy Richards TURBOSTEAM RN40630 MUK REV2

  • Page 1 RN40630 MUK Rev2_Instruction Book 15/09/2010 15:59 Page 1 Register online for your 2 year guarantee. See back of this instruction book for details. (UK and Ireland customers only) Upon registration with Morphy Richards www.morphyrichards.co.uk (UK & ROI only) TurboSteam iron Please read and keep these instructions Getting the best from your new iron...
  • Page 2: Important Safety Instructions

    When placing the iron on its heel, ensure that the surface on which the heel is placed is stable. The iron is not to be used if it has been dropped, if there are visible signs of damage or it is leaking.
  • Page 3: Electrical Requirements

    • Do not allow the cord to touch hot surfaces. For details of other Morphy Richards products, please see our website: • Let the iron cool completely • before putting away. Loop the cord loosely around the iron before storing.
  • Page 4 RN40630 MUK Rev2_Instruction Book 15/09/2010 15:59 Page 4 INSTRUCTIONS FOR USE Temperature guide Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of the International Textile Care Labelling Code. Symbol (120°C Max) Cool Do not iron...
  • Page 5: Before Use

    IN HARD WATER AREAS, THE USE OF DISTILLED OR DEMINERALISED WATER IS RECOMMENDED. For details of other Morphy Richards products, please see our website: Never use battery topping up fluid or water containing any substances like starch, or sugar, or defrosted water from a refrigerator.
  • Page 6: Vertical Steam

    This is perfectly normal and indicates that the system is functioning correctly. Auto shut-off (certain models only) If your iron is fitted with the auto shut-off function, it will automatically shut down after a set period. If the iron is left unattended in the horizontal position, it will shut down after 1 minute.
  • Page 7: Maintenance

    Allow the iron to cool and wipe over with a damp cloth and mild detergent, then wipe with a dry cloth. For details of other Morphy Richards products, please see our website: EMPTYING AND STORING When you have finished ironing, unplug your iron.
  • Page 8: Your One Year Guarantee

    Morphy Richards products are intended for household use only. Morphy Richards has a policy of continuous improvement in product quality and design. The company, therefore, reserves the right to change the specification of its models at any time.

Table of Contents