Table of Contents
Advertisement
Quick Links
RN40692MUK Rev3:RN40692 MUK Rev 3 01/12/2009 11:52 Page 1
Register online for your 2 year
guarantee. See back of this
instruction book for details.
(UK and Ireland customers only)
Upon registration with Morphy Richards
www.morphyrichards.co.uk
(UK & ROI only)
Semi-electronic iron
steam/spray/shot
Please read and keep these instructions
Getting the best from your new iron....
Safety first
Caution must be used when handling this appliance as it does get
very hot. Always switch off the unit and allow to cool before cleaning
or storing.
Self-clean
Your iron will give the best ironing results and will last longer if you
clean the soleplate once a month, see 'Maintenance' on pages 6 & 7.
!
To improve the life of your new product and to ensure the cleanliness of your
clothes, we strongly recommend the use of distilled or demineralised water.
RN40692 MUK Rev 3
If you have a problem or complaint, please call our dedicated UK based helpline
before returning your product to the retailer from where it was purchased.
UK Helpline: 0844 871 0953
Replacement Parts: 0844 873 0719
Ireland Helpline: 1800 409 119
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Morphy Richards SEMI-ELECTRONIC IRON RN40692
Summary of Contents for Morphy Richards SEMI-ELECTRONIC IRON RN40692
- Page 1 Self-clean Your iron will give the best ironing results and will last longer if you clean the soleplate once a month, see ‘Maintenance’ on pages 6 & 7. To improve the life of your new product and to ensure the cleanliness of your clothes, we strongly recommend the use of distilled or demineralised water.
-
Page 2: Important Safety Instructions
In addition, we offer the following safety advice. Location • Do not use outdoors or near water. • The iron must be used and rested on a stable surface. Children • Close supervision is necessary when any appliance is used near children. -
Page 3: Electrical Requirements
INSTRUCTIONS FOR USE Temperature guide Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of the International Textile Care Labelling Code. Symbol (120°C Max) Cool... -
Page 4: Before Use
Replacement Parts 0844 873 0719 FILLING Make sure that the iron is not plugged in, then set the steam selector switch ‹ to the ‘0’ position before filling the iron with water. -
Page 5: Features Of Your Iron
‘Filling’ on page 4, and insert the plug into the electrical socket. For details of other Morphy Richards products, please see our website: Increase temperature The steam output can be varied from low to high by moving the variable steam control D. - Page 6 No drip system Your iron is fitted with a no drip system which is designed to prevent water escaping from the soleplate when the iron is too cold.
-
Page 7: Emptying And Storing
Allow the iron to cool and wipe over with a damp cloth and mild detergent, then wipe with a dry cloth. For details of other Morphy Richards products, please see our website: Emptying and storing When you have finished ironing, unplug your iron. Ensure that the variable steam control is set at the ‘0’... -
Page 8: Your One Year Guarantee
Morphy Richards products are intended for household use only. Morphy Richards has a policy of continuous improvement in product quality and design. The company, therefore, reserves the right to change the specification of its models at any time.
Need help?
Do you have a question about the SEMI-ELECTRONIC IRON RN40692 and is the answer not in the manual?
Questions and answers