Installing The Keyboard And Rtc Battery - Toshiba Satellite C650D Maintenance Manual

4.6 Keyboard

Installing the Keyboard and RTC battery

Install the keyboard and RTC battery according to the following procedures and Figure 4-8.
1. Place RTC battery in battery locker in the correct position
2. Connect the keyboard cable to CN250 on the system board.
3. Secure the keyboard with four M2.5x2.5 black flat head screws.
4. Place the keyboard cover in the correct position and secure the following 14 latches,
in that order:
- One latch on right side and one latch on left side.
- Five bottom latches.
- Six front latches.
Satellite/Satellite Pro/C650D/C655D Maintenance Manual
4 Replacement Procedures
4-21