Display Assembly; Removing The Display Assembly - Toshiba Satellite C650D Maintenance Manual

4 Replacement Procedures
4.9

Display Assembly

Removing the Display Assembly

CAUTION: Use care to avoid that the antenna cable is not caught between the display
assembly and computer.
Remove the display assembly according to the following procedures and Figures 4-12.
1. Turn the computer upside down and remove two M2.5x6 black flat head screws.
2. Restore the normal computer placement and open the display panel.
3. Disconnect the LCD/FL cable from CN3000 on the system board.
4. Remove four M2.5x6 black flat head screws securing the LCD module to the bottom
cover.
5. Remove the wireless antenna cables from the bottom cover.
4-26
.
M2 5x6 black flat head screw
LCD FL cable
Wireless LAN antenna
CN3000
Figure 4-12 Removing the display assembly
Satellite/Satellite Pro/C650D/C655D
4.9 Display Assembly
Maintenance Manual