Toshiba Satellite C650D Maintenance Manual page 74

3.2 Quick Start
The status bar is used to indicate the current script setting and test status. It consists of two
lines that includes the information as follows:
Test Mode: TIMEBOUND or LOOPBOUND, e.g. LOOPBOUND in the above screen;
Script File Name: Script file name, e.g. 'Custom.INI' in the above screen;
Current Time(C. TIME): Current system time, e.g. 'C.TIME:2008-02-16 00:42:40' in
the above screen;
Test Time Remaining (LEFT): In TIMEBOUND mode, it would display the remaining
test time at the same location as Current TIME (C. TIME) in the above screen;
Current Loop Count: In LOOPBOUND mode, it will display the total LOOP number
planning to execute and the current LOOP number have been finished, e.g. 'COUNT:
01/01' in the above screen;
CPU Temperature: Detect the temperature in the current CPU, e.g. 'CPU: 56C' in the
above screen;
Remaining Battery Capacity: Remaining Battery Capacity detected in the current
Battery, e.g. 'BAT: 46%';
Test Order: Define the test sequence. There is two sequence modes: Sequential Test
Mode and Random Test Mode. The default mode is Sequential Test Mode, it would
displays 'ORDER: SEQ' as in the above screen;
LOG File Name: Display the file name of the test log, e.g. Custom.Log in the above
screen;
Start Test Time (S.TIME): Display the test start time for the current test item or the test
script, e.g. 'S.TIME: 2008-02-16 00:42:28' in the above screen;
Break On Error: Display 'HALT' as shown in the above screen when 'Break On Error'
is enabled;
Wait On Error: Display 'WAIT' as shown in the above screen when 'Wait On Error' is
enabled;
Pause Enable: Display 'PAUSE' when "Pause Enable" is enabled;
Manual Interrupt Method: Display 'Esc: Break' to tell the user how to manually
interrupt the test process.
Satellite/Satellite Pro/C650D/C655D Maintenance Manual
3 Diagnostic Programs
15