Installing The Memory Module And Rtc Battery - Toshiba Satellite C850D Maintenance Manual

4.4 Memory Module and RTC battery

Installing the Memory Module and RTC battery

Install the memory module and RTC battery according to the following procedures and
Figures 4-5, after checking that the computer is turned off in boot mode.
CAUTION: Install the optional memory after turning off the computer. If this is
violated, the computer or memory can be damaged.
1. Place RTC battery in battery locker in the correct position.
2. Insert the memory module into the connector at an angle of 45 degrees.
3. Press down on the memory module so that it is secured with both memory lock
latches.
4. Secure the optional memory cover with the optional memory cover securing screw.
6. After the computer is turned on, check the hardware configuration in the Hardware
Setup or TSETUP program to make sure that the installed memory module has been
recognized by the system. If it has not been recognized yet, check the connections.
Satellit /Satellite Pro /C850D/C855D /L850D/L855D
4 Replacement Procedures
Maintenance Manual 4-15