Touchpad Button Board - HP MINI 210 Maintenance And Service Manual

TouchPad button board

Description
TouchPad button board
Before removing the TouchPad button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Service access cover (see
b. Keyboard (see
c. Top cover (see
Remove the TouchPad button board:
1. Turn the top cover upside down, with the front toward you.
2. Release the TouchPad button board ZIF connector (1), and then disconnect the TouchPad
button board cable (2).
3. Remove the two Phillips PM2.0x3.0 screws (3).
4. Remove the TouchPad button board (4).
58 Chapter 4 Removal and replacement procedures
Battery on page 37).
Service access cover on page
Keyboard on page 48).
Top cover on page 54).
Spare part number
651901-001
38).