Hard Drive - HP MINI 210 Maintenance And Service Manual

2. Remove the RTC battery (2) from the socket on the system board.
Reverse this procedure to install the RTC battery. When installing the RTC battery, be sure the "+"
sign faces up.

Hard drive

NOTE: The hard drive bracket is included in the Hard Drive Hardware Kit, spare part number
651899-001.
Description
Hard drive:
500 GB, 9.5 mm (0.37 in) × 6.35 cm (2.50 in), parallel SATA, 5400-rpm (select models only)
320 GB, 9.5 mm (0.37 in) × 6.35 cm (2.50 in), parallel SATA, 5400-rpm (select models only)
250 GB, 9.5 mm (0.37 in) × 6.35 cm (2.50 in), parallel SATA, 5400-rpm
320 GB, 7.0 mm mm (0.28 in) × 6.35 cm (2.50 in), parallel SATA, 5400 rpm
250 GB, 7.0 mm (0.28 in) × 6.35 cm (2.50 in), parallel SATA, 5400 rpm
Hard Drive Hardware Kit
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Spare part number
634932-001
622643-001
622641-001
645193-001
645191-001
651899-001
Component replacement procedures 45