Table of Contents
Advertisement
Security System Operation (cont'd)
SCREEN
Arming (typical)
Armed (typical)
14
ACTION
2. On the "Arming" screen, press the
selected arming button.
Note: If Quick Arm is Not enabled in your
system, you will receive a message to
enter your User Code.
The TouchCenter beeps twice
o
(Away and Night Maximum Modes) or
3 times (Stay and Night Instant
Modes)
a DISARM button appears
o
a text message appears stating
o
which zones are arming and whether
or not there is an entry delay
the screen changes to display
o
the remaining exit delay time, and
an "open lock" appears next the
o
the arming buttons as follows:
Away – Next to the Away button
Stay – Next to the Stay button
Instant – Next to the Night button
Night – Next to the Night button
The exit delay time continues to
o
decrement to one.
When exit delay time expires, the screen
automatically changes to indicate the
system is "Armed" and the "lock" next to
the button changes to a closed lock. The
system is now armed in the selected
mode.
Advertisement
Table of Contents
