Chapter 5: Technical Support; Manufacturer's Statement; Radio Frequency Interference Requirements - 3e Technologies International AirGuard 3e-525C-2 User Manual

Airguard
Table of Contents

Advertisement

3e–525C–2 Wireless Access Point

Chapter 5: Technical Support

Manufacturer's Statement

The 3e–525C–2 is provided with warranty. It is not desired or ex-
pected that the user open the device. If malfunction is experienced and
all external causes are eliminated, the user should return the unit to the
manufacturer and replace it with a functioning unit.
If you are experiencing trouble with this unit, the point of contact is:
support@3eti.com
or visit our website at
www.3eti.com

Radio Frequency Interference Requirements

This device has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the Federal Communications
Commission's Rules and Regulations. These limits are designed to pro-
vide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Installation should be accomplished using the authorized cables
and/or connectors provided with the device or available from the
manufacturer/distributor for use with this device. Changes or modifica-
tions not expressly approved by the manufacturer or party responsible for
this FCC compliance could void the user's authority to operate the equip-
ment.
29000155-001 A
Chapter 5: Technical Support
69

Advertisement

Table of Contents
loading

Table of Contents