Table of Contents
Advertisement
3e–525C–2 Wireless Access Point
On your computer, pull up a browser window and put the de-
fault URL for the 3e–525C–2 Local LAN in the address line. (https://
192.168.15.1)
You will be asked for your User Name and Password. The default is
"crypto" with the password "officer" to give full access for setup configu-
ration. (This password is case-sensitive.)
NOTE: If your login session is in-active for more than 10 minutes,
then you will have to re-authenticate your identity. If after three times
you fail to re-authenticate then your account will be locked. The excep-
tion is if you are the last active CryptoOfficer on the system, then your
account will not be locked. The User Management—List All Users screen
displays account status. If an account is locked, it will show a status of
"Locked" and a reason of "bad passwd". Other accounts show status as
"Active" and reason "Normal".
The CryptoOfficer is the only role that can unlock an account once it
has been locked. Go to the User Management—List All Users screen and
click the unlock buttn at the end of the user entry.
If you have forgotten your user name or password you can reset the
unit back to its factory default username and password by pressing and
holding the reset button on the front of the unit for 10 seconds. Note that
all your settings will also be reset to factory defaults.
29000154-001 A
Chapter 3: Access Point Configuration
23
Advertisement
Table of Contents
