Initial Setup Using The "Local" Port - 3e Technologies International AirGuard 3e-525C-2 User Manual

Airguard
Table of Contents

Advertisement

3e–525C–2 Wireless Access Point

Initial Setup using the "Local" Port

Plug one end of an RJ-45 Ethernet cable to the LAN port of the
3e–525C–2 (see page 11) and the other end to an Ethernet port on your
PC/laptop. This LAN port in the 3e–525C–2 connects you to the device's
internal DHCP server which will dynamically assign an IP address to
your laptop so you can access the device for configuration. In order to
connect properly to the 3e–525C–2 on the LAN port, the TCP/IP parame-
ters on your laptop must be set to "obtain IP address automatically." (If
you are unfamiliar with this procedure, use the following instructions for
determining or changing your TCP/IP settings.)
In Windows 98/Me click Start à Settings à Control Panel.
Find and double click the Network icon. In the Network window,
highlight the TCP/IP protocol for your LAN and click the Proper-
ties button. Make sure that the radio button for Obtain an IP address
automatically is checked.
In Windows 2000/XP, follow the path Start à Settings à Net-
work and Dialup Connections à Local Area Connection and select
the Properties button. In the Properties window, highlight the TCP/
IP protocol and click properties. Make sure that the radio button for
Obtain an IP address automatically is checked.
Once the DHCP server has recognized your laptop and has assigned a
dynamic IP address, you will need to find that IP address. Again, the pro-
cedure is similar for Windows 95/98/Me machines and slightly different
for Windows 2000/XP machines.
In Windows 98/Me, click Start, then Run and type winipcfg in
the run instruction box. Then click OK. You will see the IP address of
your laptop in the resulting window, along with the "default gate-
way" IP address. Verify that the IP address shown is 192.168.15.x
In Windows 2000/XP, click Start, then Run and type cmd in the
run instruction box. Then click OK. This will bring up a window. In
this window, type ipconfig /all |more. This will list information as-
signed to your laptop, including the IP address assigned. Verify that
the IP address shown is 192.168.15.x
22
Chapter 3: Access Point Configuration
29000154-001 A

Advertisement

Table of Contents
loading

Table of Contents