Table of Contents
Advertisement
3e–525C–2 Wireless Access Point
LED
Power
WAN
WLAN1 Activity
WLAN2 Activity
WLAN Signal Strength
29000155-001 A
Description
The Power indicator LED informs you when the gate-
way is on or off. If this light is on, the gateway is on; if
it is not on, the gateway is off.
This light indicates the state of your connection to the
organization's Ethernet LAN network. When on, the
WAN light indicates that the unit is connected to the
network. When the WAN light is off, the gateway does
not have an active connection to the network.
This light may be steady or blinking and indicates that
information is passing through the AP connection.
This light may be steady or blinking and indicates that
information is passing through the Bridge connection.
The Strength LED indicator indicates the strength of
the Bridge connection (WLAN2).
1. LED Off: means no connection on the bridge side, or
the signal is very weak
2. LED blinks slowly (every 1 second): means there is a
connection, and the signal quality is poor
3. LED blinks fast: means there is a connection, and the
signal quality is good
4. LED steady on: means there is a connection, and the
signal quality is excellent
Chapter 2: Hardware Installation
19
Advertisement
Table of Contents
