Table of Contents
Advertisement
3e–525C–2 Wireless Access Point
Tx Pwr Mode
Fixed Pwr Level
Propagation
Distance
Bridging Mode
SSID
Max Auto
Bridges
Bridge Priority
Signal Strength
MAC
54
OFF
FIXED,
AUTO
1, 2, 3, 4, 5
< 5 Miles
5-10 Miles
11-15 Miles
16-20 Miles
21-25 Miles
26-30 Miles
> 30 Miles
Auto Bridging
1-40
1-40
Chapter 4: Wireless Bridge Configuration
The Tx Pwr Mode defaults to AUTO,
giving the largest range of radio
transmission available under ambient
conditions.
The wireless bridge's broadcast range
can be limited by setting the Tx Pwr
Mode to Fixed and choosing from 1-5
for Fixed Pwr Level.
If you want to prevent any radio
frequency transmission from the
wireless bridge, set the Tx Pwr Mode
to OFF. This will not turn off RF trans-
missions from any associated wireless
devices, but they will not be able to
communicate with the wireless bridge
when the Tx Pwr Mode is off.
Select a range when Rx Pwr Mode is
set to FIXED. Level 1 is the shortest
distance (Level 1=7dBm) and Level 5
is the longest (Level 5=15dBm)
Set the distance based on the distance
between this bridge and furthest
bridge that is connected to it.
auto bridging selected
Can be any set of letters and numbers
assigned by the network adminis-
trator. This nomenclature has to be
set on the wireless bridge and each
wireless device in order for them to
communicate.
Maximum number of auto bridges
allowed.
Determines the root (leaf) STP node.
The lowest bridge priority in the net-
work will become the STP root.
The signal strength of this wireless
bridge will be indicated on the Signal
Strength LED located on the front of
the case.
29000155-001 A
Advertisement
Table of Contents
