Table of Contents
Advertisement
Use clamps (not included) or other practical ways to secure and support the
1.
workpiece to a stable platform. Holding the work by hand or against your body
is unstable and may lead to loss of control.
2.
Do not force the tool. Use the correct tool for your application. The correct
tool will do the job better and safer at the rate for which it is designed.
3.
Do not use the power tool if the trigger does not operate it. Any tool that cannot
be controlled with the trigger is dangerous and must be replaced.
Remove the battery from the tool and set the Rotation button (9) to the cen-
4.
ter, locked position, before making any adjustments, changing accessories,
or storing the tool. These preventive safety measures reduce the risk of starting
the tool accidentally.
Store idle tools out of reach of children and other untrained persons. Tools
5.
are dangerous in the hands of untrained users.
Maintain tools with care. Keep drill bits (not included) sharp and clean. Prop-
6.
erly maintained accessories with a sharp cutting edge are less likely to bind and
are easier to control. Do not use a damaged tool or accessory. Tag damaged tools
"Do not use" until repaired.
7.
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool's operation. If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the manufacturer for your
8.
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
Tool service must be performed only by qualified repair personnel. Service or
1.
maintenance performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. follow instruc-
2.
tions in this manual. Use of unauthorized parts or failure to follow maintenance
instructions may create a risk of electric shock or injury.Specific Safety Rules
Maintain a safe working environment. Keep the work area well lit. Make sure
1.
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use the Cordless Drill in
for technical questions, please call 1-800-444-3353.
SKU 95848
Tool Use and Care
Service
SPECIfIC SAfETy RULES
PAGE 4
Advertisement
Table of Contents
