36
Setup for NetWare
Setup using NDPS
The AXIS 5470e supports Novell Distributed Print Services (NDPS). You can run NDPS
over Pure IP (TCP/IP) or IPX/SPX.
Before the AXIS 5470e can be installed, make sure that NDPS is installed and a Broker is
loaded on your NetWare file server.
Notes:
• NDPS requires that you run NetWare 4.11 or higher.
• Pure IP is only supported by NetWare 5 or higher.
Having assigned an IP address to the AXIS 5470e as described in Assigning an IP address
on page 10, you are now ready to install the AXIS 5470e for NDPS printing. You can select
to install the connected printers as public or controlled access printers. Follow the
instructions below to install the AXIS 5470e using NDPS:
Notes:
• The HP-JETADMIN parameter of the AXIS 5470e must be set to YES in order for the communication between
the AXIS 5470e and the NDPS gateway to be enabled. Set this parameter in the print server's internal web
pages: admin | General Settings | HP JetAdmin Support (default value=NO)
• If you do not have an NDPS Manager object available, start out with creating one in the NetWare Administrator.
AXIS 5470e User's Guide