Setup For Ndps - Axis 570 User Manual

Setup for NDPS

26
Peer-to-peer printing -
requires that all users install the AXIS Print Utility for Windows on their workstations. Follow the
instructions below to install your AXIS 570/670 for peer-to-peer printing on a Windows for
Workgroups or Windows 3.1 workstation:
1. Double-click the AXIS Print Utility icon.
2. In the Port menu, click Add. In the NPS Port list, select the AXIS 570/670 port to be installed.
The ports appear as <name>.LP1, <name>.LP2, and <name>.CM1, where <name> is
AX followed by the last six digits of the AXIS 570/670 serial number. For example:
AX100B35.LP1
3. Accept or change the suggested Windows port name, and type any comments in the
Description field. Make a note of the Windows port name as you will need this later. Click OK
to install the Windows port.
4. In the Port menu, click Connect to bring up the Windows Printers dialog.
5. Select a printer driver from the list of Installed Printers, or click Add>> to install a new driver.
Click Connect...
6. Select the Windows port name defined in step 4 above that should now feature at the bottom
of the Ports list.
7. Click OK to close the Connect dialog, and Close to close Printers.
The setup is completed and you can now print through your AXIS 570/670.
Notes:
Windows 3.1 requires network support such as LAN server or LAN Manager Workstation software to be
installed in order to redirect a local printer port to a network device.
AXIS Print Utility for Windows must be running when you print through your AXIS 570/670. We strongly
recommend that you copy the AXIS Print Utility icon into your StartUp folder.
Setup for NDPS
Important!
Before the AXIS 570/670 can be installed in NDPS IPX mode, you must install NDPS and an HP Gateway on
your NetWare file server. The HP Gateway is included in the NDPS software and is automatically installed
together with NDPS.
Follow the instructions below to install the AXIS 570/670 as a Public Access printer:
1. Make sure that the HP Gateway is configured to automatically create a public access printer.
2. Connect the AXIS 570/670 to the NetWare network, if it is not already connected.
This print method is recommended for smaller networks and
AXIS 570/670 User's Guide